Pickles. They were too strong and sour for me. Now I love 'em.

That’s so neat; I’d never noticed that before. And the walls closing in on the stage adaptation is really clever

“12 Angry Men” (1957) is a personal favorite that I recommend to pretty much everyone. Great messages about questioning assumptions, challenging biases, understanding the limitations of evidence, acknowledging imperfections in the justice system, and the consequences thereof.

The movie is also cinematically interesting to me because it feels “small”. The entire movie just about takes place in one room, and the events of the film transpire over the course of one afternoon.

I found almond milk to be a great substitute a couple of years ago when I was dieting. Particularly the ‘unsweetened, vanilla’ variety from Almond Breeze.

As an added bonus, it also has a much longer shelf life than regular milk.

As others have pointed out, there’s a lot to hate about ads since the industry is routinely dishonest, insulting, obnoxious, deceptive, intrusive, and all manner of unpleasant. I’ve been adblocking religiously for most of my life for these reasons.

So I think a more interesting question might be the other way around: “What do you like about commercials?”

The only commercials I’ve ever liked are the ones for local small businesses. The ones with a nonexistent production budget that aren’t beating the viewer over the head with blatant lies or dishonest sales tactics.

Adult Swim used to have faux-ad bumpers for the fictional business “Strickland Propane” from King of the Hill, featuring the honest-to-a-fault character Hank Hill as the spokesman, which I felt captured that vibe well.

Rhett and Link also made a funny homage to these kinds of commercials in this classic skit: https://www.youtube.com/watch?v=vnOyMSEWNTs

and connect to it with an iPad that has a Jellyfin client installed?

In my experience, you don’t even need the dedicated Jellyfin client. Just opening it up in a web browser works out of the box, so that’s potentially one less thing to download/install/manage for the clients.

That said, I’ve never tried to access Jellyfin from an iPad/iPhone/Mac so it might not be as seamless as my experiences on Android/Linux based devices. But I imagine they’d be fine; just test it out before you hit the road.

I don’t watch a lot of creepy/spooky stuff, so my recommendations come from a fairly limited breadth. That said, I recommend a few things that many might lump under “kid movies” (I prefer the more accurate label “family entertainment”) since they tend to be perilous and unsettling without being outright violent, gory, or generally miserable.

Coraline (2009) - A young girl, dissatisfied with her home life after moving to a new town, stumbles upon a dark, parallel world. Therein, she finds solace in a parallel version of her mother who is not what she seems.

Paranorman (2012) - A young boy who can speak with the dead learns that a witch who was executed by the townspeople hundreds of years ago will soon return to seek vengeance upon them.

Over the Garden Wall (2014) - A mini-series focusing on two brothers who find themselves inexplicably lost in a forest teeming with fell beasts, witches, undead, and unlikely allies. I watch this one every year around this time. Cozy yet spooky at the same time.

Ah, thanks for the tip. I’ve got a dinky little pair of binoculars lying around, so I’ll give 'em a try

Noice. There isn’t too much light pollution around where I live, so I’m hoping to get to see it some time over the next few days if the conditions are right

Hell yeah. Did you have to do a long exposure for this, or could you also see it with the naked eye?

I’ve tried catching a glimpse over the last few days, but it’s just too close to the sun, even after sundown.

Is it “fair”? I’d say no, but the world isn’t a fair place. Enormous, unscrupulous corporations are to blame for the untenable situation we collectively find ourselves in. And those corporations aren’t going to be rectifying their behavior any time soon unless forced to.

That being said, asking individuals to take steps to reduce climate change isn’t an unreasonable thing in my eyes. Because, until corporations are held accountable, asking individuals is the only thing that can possibly improve the situation. Even though it’s like throwing a cup of water on a forest fire.

The second that Amazon, Shell, BP, ExxonMobil, Chevron, Coke, Pepsi, et al are forced to do their part, I will start throwing my trash out the window again like a proper American. Until then, I’m gonna recycle and encourage my friends and family to do so as well.

“Sons of Texas” reminded me of this tune I enjoyed a while back from Maylene and the Sons of Disaster:

“Step Up (I’m On It)”

The official documentation has some guides on setting it up in a few different ways, although they assume the user is decently familiar with Linux/terminal commands and such. There might be some more beginner-friendly guides out there, though.

https://jellyfin.org/docs/general/installation/container/

I switched from Plex to Jellyfin a while back and I’ve been very happy with it.

These “moderators” should be ashamed of themselves. They couldn’t be more transparently treating one participant with kid gloves and letting him talk as much as he wants.

It’s what I expected, but I am still disappointed.

Thanks a lot! I’ll look into the upgrades you mentioned and try my luck. Here’s hoping I can get it back up and running without too much work

Thanks a bunch; I’ll check out the PEI coated build plate.

I’ve contemplated getting the BLTouch probe for auto-leveling, but I don’t think bed leveling is the root of the issue; I’ve leveled the darn thing about a thousand times by now

Agreed on the Ender 3’s needing some tinkering. My wife got me the Ender 3 V2 a couple of years ago for Christmas and I like it a lot, but I spend more time troubleshooting it than actually printing stuff.

I like to tinker, but the Ender 3 V2 takes advantage of that fact.

Any recommendations on part upgrades? I’ve upgraded the nozzle and the extruder on mine (the stock, plastic extruder cracked badly last year and I replaced it with a full metal one), but it is still very unreliable. Prints are always failing due to adhesion issues even if I use aftermarket adhesives like MagiGoo on the build plate.

Any politician want to make an argument against abortion that doesn’t involve “muh faith”?

I live in NC and have unfortunately been exposed to this guy’s campaign ads on several occasions. While his religion is definitely a factor in his policies, there’s also just good old-fashioned misogyny. He regularly frames abortions as only being necessary because women “can’t keep their legs closed” and crap like that.

And that’s barely scratching the surface. If you want the abridged version, check out his Wiki page: https://en.wikipedia.org/wiki/Mark_Robinson_(American_politician)#Political_views_and_remarks

The guy is a total nutjob.

Depends on the particular device. LDAC has been around for years and supports higher bitrates than mp3s (assuming we’re putting 320kbps mp3s in the “higher quality” category)

You are wrong =)