This might be a really stupid noob question, but I am looking to move to Linux from Windows/Mac, and am about to install an SSD into my very old test machine for Linux distros.

You might have seen my recent post asking for recommends: it has the hardware specs of my test box, and I’ve updated it with the list of distros I intend to try.

My test box still has a working HDD in it, so no action is required immediately.

But my question is: once I decide on a distro and start moving machines over to Linux, what kind of manual care do I have to put in to maintain my SSD drives, if any?

For each box with a SSD drive and Linux as the OS, do I need to do TRIM manually, do I need to turn it on for a “set and forget” type scenario, or are recent and regularly upgraded distros able to spot a SSD and do the necessary without my intervention?

I guess what I’m really asking is: is SSD TRIM support pretty much standard now across distros, or is it something I need to investigate individually for each distro I install?

I recognize I may just need to ask this again once I settle on a distro, but since I’m trying so many – and may fully install more than one – I thought I’d get a jump on it.


EDITED TO ADD: Many thanks to all who took the time to answer. Now I know exactly what to read up on, and if necessary, look up how to do manually for whatever distro(s) I settle on. I -really- appreciate the help. Thank you!

  • DefederateLemmyMl@feddit.nl
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    1 year ago

    Trim support is standard. Any kernel released in the past 15 years or so will have trim support built in. So that’s not something you should worry about.

    How trimming is triggered is another matter, and is distro dependent. On Arch and Debian at least there is a weekly systemd timer that runs the fstrim command on all trimmable filesystems. You can check it if’s enabled with: systemctl list-unit-files fstrim.timer. I can’t tell how other distributions handle that. On Debian derived ones, I imagine it’s similar, on something like Slackware, which is systemd-less and more hands-off in its approach, you may have to schedule fstrim yourself, or run it manually occasionally.

    There is also the discard mount option that you can add in /etc/fstab, which enables automatic synchronous trimming every time blocks are deleted, but its use is discouraged because it carries a performance penalty.

    Hope that answers your question.

    • ChunkMcHorkle@lemmy.worldOP
      link
      fedilink
      arrow-up
      0
      arrow-down
      1
      ·
      1 year ago

      Yes, this helps tremendously. Thank you so much for taking the time to write out not just the info, but all the terminal instructions for this noob. Much appreciated!

    • ChunkMcHorkle@lemmy.worldOP
      link
      fedilink
      arrow-up
      0
      arrow-down
      1
      ·
      edit-2
      1 year ago

      Excellent question, and for people who have SSDs it’s worth knowing the answer.

      Very simply, SSDs store data differently than HDDs, and when a file is removed, sectors on SSDs have to be explicitly cleared instead of simply waiting to be overwritten like on HDDs. Not doing so on a regular basis decreases the lifespan of the SSD. Crucial (a SSD manufacturer) explains it here much better than I can:

      https://www.crucial.com/articles/about-ssd/what-is-trim

      • pm_me_some_serotonin@lemmy.zip
        link
        fedilink
        arrow-up
        0
        ·
        1 year ago

        I have never read much about trim before. Now I’m curious about something: if an ssd was trimmed, is all deleted data lost? Is filling an ssd with random data unnecessary if we want so safely delete something?

  • MrMcGasion@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    1 year ago

    There are some differences between distros as to whether TRIM is enabled by default or not (I’ve read Ubuntu enables it by default, but Debian does not). That said, depending on what file-system your ssd is formatted with it may be enabled by default at that level. The most-often recommended file-systems for SSDs are Btrfs and F2FS, both of which support and enable TRIM by default (as of Linux 6.2 for Btrfs, so if you are running an older kernel version you might need to manually enable it). I think most distro installers support using Btrfs as the main file-system, but F2FS is a bit more hit and miss I think. Safest bet would be to investigate once you settle on a distro, but support should be pretty standard, even if it’s not enabled by default.

    • ChunkMcHorkle@lemmy.worldOP
      link
      fedilink
      arrow-up
      0
      arrow-down
      1
      ·
      1 year ago

      The most-often recommended file-systems for SSDs are Btrfs and F2FS, both of which support and enable TRIM by default (as of Linux 6.2 for Btrfs, so if you are running an older kernel version you might need to manually enable it).

      This is great to know on multiple levels because in Windows it is triggered from the OS, I think as a weekly task, and NTFS has little to do with it as far as I know.

      It’s also good to know that support is pretty standard now, as a lot of what I found online was just old and the rest assumed I’d already be familiar with it. Bad assumption, lol.

      I don’t know enough to have a preference one way or another for a specific file system, so I can just start with Btrfs and go forward with that. I can also read up on Btrfs further on its own, which I now know to do.

      Safest bet would be to investigate once you settle on a distro

      Absolutely. But this gets me started, and pointed in the right direction. Many thanks.

      • AProfessional@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        edit-2
        1 year ago

        This is a bit of misinformation. There is no evidence other filesystems have any downsides on an SSD. Use the default choice of your distribution. Roughly nobody uses F2FS on desktops. EXT4 is entirely reasonable and supports TRIM.

        • ChunkMcHorkle@lemmy.worldOP
          link
          fedilink
          arrow-up
          0
          arrow-down
          1
          ·
          1 year ago

          Ext4 seems to be the default across the distros I’ve looked at so if I can just run with that, all the better. Thank you for pointing this out, much appreciated.

  • Resolved3874@lemdro.id
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    Can’t answer your question since it’s not something I ever thought about but I recently, within the last 2 weeks, started the same thing. I tried Mint and EndeavorOS so far and honestly I probably won’t leave EndeavorOS again. I installed it first. Confused the fuck out of myself because years ago I use Ubuntu so I had that like hard coded in me and couldn’t get my head around arch. After playing with Mint for a week or so I’m back on EndeavorOS and I love it. I really really want to switch my main PC over but I have a Plex server and audio book shelf server running there as well as atleast 1 game that playing on Linux just isn’t possible since Bungie will ban you for running destiny 2 on Linux.

    • ChunkMcHorkle@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      0
      arrow-down
      1
      ·
      1 year ago

      EndeavorOS

      I’ll add that to the list of distros I want to try, I hadn’t seen it before but it does run on minimal hardware. I like that it’s built on Arch because Arch itself is a good OS, but intimidating for a noob, lol. According to Distrowatch.com it’s near the top of their page hits so it must be popular. Thanks for the recommend!

      Bungie will ban you for running destiny 2 on Linux.

      That is so bizarre to me. According to this article, Destiny 2 was already playable on Linux when it was officially ported to Google Stadia, and no one, not even Bungie, can explain why they won’t support it on Linux or Steam Deck, much less ban a player for trying. That’s crazy.